Adhesive Shear Testing Equipment Tape Holding Power Lasting Test ASTM D 3654

PT-6010-10.pdf

Use:

The holding power of pressure-sensitive tapes, to do a static load test for the adhesive force of the tape, automatically under a certain load,Record the time that the tape can hold to confirm the aging of the tape. Cut a 1 inch wide strip The tape is attached to the specified SUS#304 stainless steel plate, and is passed through a 2kg standard roller at a speed of 300mm per minute. Roll back and forth once, hang the steel plate on the testing machine, add the specified weight, generally 1kg when the tape comes from the steel plate, after falling, the timer automatically keeps the test time

Holding Power Tester Specification :

Test Steps :

1. Take a certain length of adhesive tape to be tested, place it on the attached test board, use a roller with a weight of 2000gf±50gf at a speed of 300mm/min
Roll back and forth 3 times to make the adhesive tape evenly adhere to the test board (generally 1"×1" or according to relevant test standards), prepare ten sets of test boards according to this method.
Note: The test board is made of #304 mirror steel plate. After the sample is pasted on the test board, it should be placed at a temperature of 23℃±2℃ and a relative humidity of 65%±5%.
20 minutes, then hang on the hooks in the testing machine.
2. Gently connect the connecting piece and the weight (the choice of weight depends on the material). After hanging the weight, the timer automatically starts timing.
3. When the tape falls off, it automatically stops timing and keeps the tested time, and reads the adhesive time of the tape. If the time is greater than 1h, take min as the unit, smaller
In 1h, the unit is s. Or after the specified time, when the sample has not fallen off, use the indexed magnifying glass to measure the sliding displacement of the sample, accurate to 0.1mm
4. Before each test, be sure to reset the timer to zero.

Shear Adhesion Tester Picture :

Retention Test :

Perfect International Instruments Co.,Ltd, the excellent supplier of global testing machine and related services, was founded in 1997 ,Taiwan .Then, Dongguan factory was founded in 2003. It has been providing quality improvement solutions for rubber, plastics, footwear, food, daily chemical, paper, color printing packaging, suitcase handbags, electronic wire, textile, sports equipment, biochemical, pharmaceutical, household appliances, office equipment, aviation, aerospace, as well as the colleges and universities, research institute and other customers from area of scientific research and development.

Perfect International Instruments Co.,Ltd, mainly focus on research, manufacture and sales in Tensile Testing Machine, Universal Testing machine,Hydraulic Compression Testing Machine,Tensile Strength Tester Environmental Test Chamber,Temperature Humidity Test Chamber,Aging Oven, Hot Air Drying Oven,Salt Spray Chamber,Adhesive Tape Tester,Luggage Suitcase and Bags Test Equipment . The products meet UL, ASTM, JIS, GB, ISO, TAPPI, EN, BS...and other domestic and international standards.

Perfect Instruments has accumulated over 20 years of technology and experience, and has obtained more than dozens of patents, such as invention, utility model and appearance.Since 1997 into the domestic development, gradually for the adhesive testing industry, paper packaging industry, cosmetics, food and beverage, bags handbags and other industries to import foreign advanced quality detection technology and international advanced technology of detecting instrument.

Our ideal : To provide customers with the best solution to improve the quality of products, eliminate the defects of all products and use hidden dangers, and pursue to improve the quality of human life！